Barclay Products TKATS60-WBN4 Guide d'installation télécharger pdf

Acrylic Claw Foot Tub

INSTALLATION INSTRUCTIONS

P 847•244•1234 www.barclayproducts.com

9/7/10

Tools Needed

• Wrench or socket • Drill & Bits •

Anchor Tub to Floor

1. Place tub in intended position on floor.

2. Mark foot anchoring locations on floor with pencil.

3. Move tub to the side to allow work space.

4. Drill starter holes in floor.

5. Put tub back into position.

6. Place flat washers on lag bolts.

7. Put lag bolts through slot in bottom of foot and screw into floor using wrench or socket.

Be sure to re-inforce the floor before securing tub. We recommend 2- 2”x12”‘s securely

fastened to floor beams where you plan to secure your tub.

Parts Recommended

• 2-2”x12” boards • 4 Lag Bolts • 4 Flat Washers

1 2 3 4 5 6

Acrylic Claw Foot TubINSTALLATION INSTRUCTIONSP 847•244•1234 www.barclayproducts.com9/7/10Tools Needed• Wrench or socket • Drill & Bits • Anc

INSTALLATION INSTRUCTIONSP 847•244•1234 www.barclayproducts.com4/14/09Parts Included• 1 Valve Body • 1 Hose • 1 Cradle • 1 Elephant Spout • 3 Wa

Page 3

1. Connect both halves of the curtain frame (1) using the ceiling tees and wall tees as shown above. In order to insure a solid fit, the tees fit s

ASSEMBLY INSTRUCTIONSP 847•244•1234 www.barclayproducts.com3/22/121. First be sure to shut off the the water supply. Remove old water supply tubi

INSTALLATION INSTRUCTIONSP 847•244•1234 www.barclayproducts.com3/17/08To Assemble Tubes1. First be sure to shut off the the water supply. Remove

Page 6

INSTALLATION INSTRUCTIONSP 847•244•1234 www.barclayproducts.com1/8/08To Assemble Tubes1. Assembled #3 and #8 screw into #2. #7 is on top of #2 be

Pas de commentaire

Barclay Products TKATS60-WBN4 Guide d'installation